iXS Motorcycle Jacket HYDRO BOT System Black

iXS Motorcycle Jacket HYDRO BOT System Black

Data sheet:

• HYDRO_BOT jacket with active insert for moisture transpiration on the back
• Breathable mesh lining for optimal body temperature
• Elasticated cuffs on endssleeves
• Width adjustment on the hem of the jacket with elastic cord
• 2 inside pockets in fixed mesh lining and 1 small battery pocket
• Long connection zipper

Usage :

• For best results, we recommend wearing functional underwear made of synthetic materials with good moisture wicking
• Installation/Operation:
• Jacket compatible with the Montevideo-Air 2 jacket.0 (X51039)
• Connect the control console with the HYDRO_BOT system cable in the jacket
• Insert the operating console into the appropriate pocket in the jacket
• Charge the operating console with the USB charging cable. A red light flashes while charging. The battery lasts 16 hours under normal conditions.
• Start the system by pressing the button on the command console
• Press 1 time: solid green light, the system is on
• Press 2 times: green light flashing, the system is in standby. The HYDRO_BOT system can be activated and deactivated in standby mode
• Press the button for 3 seconds to turn off. A red light flashes briefly and the system is off.

Care/cleaning:

• the operating console must be removed from the jacket before washing
• Wash by hand or separately at 30-C on low speed (max. 500) or without spinning
• Do not tumble dry and do not iron

Purpose/function :

• HYDRO_BOT is the first active moisture absorption membrane that transports moisture and vapor from the inside out through electro-osmosis.It was developed and tested in professional laboratories in collaboration with the Swiss Materials Science and Technology Laboratories (EMPA)
• If necessary, the HYDRO_BOT fabric transports moisture electronically, independent of external factors such as temperature and humidity, with direct electronic control of the direction and amount of transport. The membrane has billions of pores/m2. When the elements receive a small electrical impulse, moisture is transported away from the body at high speed through the pores to the outside of the jacket. This process is known as electro-osmosis.The HYDRO_BOT insert is strategically positioned in the points of the back that sweat the most

Supplied :

• HYDRO_BOT remote control and charging cable

Attention :

• Carrying a backpack can reduce system performance.
• A backpack with a ventilation system is therefore recommended
• The HYDRO_BOT system material itself does not have a high water column.It works like a water pump, not a water barrier
• Outer material: 92% polyester,8% elastane
• Outer material:100% laminated polyurethane